Burn Rates of Clusters of Colored Sparklers
K. L. and B. J. Kosanke
ABSTRACT: In recent years it has become generally known that clusters of sparklers burn at substantially greater rates than individual sparklers. However, except for a previous article by the authors, little if any quantitative data has been presented on this subject. As background information, that article contained a brief discussion of burn types and some factors acting to control burn rates. Any reader wishing to review those subjects can consult that article or two other articles presenting more complete discussions. The current article presents some data for 10-inch Red Lantern “Electric Sparklers” (colored sparklers) and discusses some aspects of consumer warnings and directions.
Ref: Selected Pyrotechnic Publication of K.L. and B.J Kosanke, Part 4, (1995-1997), pp 135-138
(K4_135) Share on Facebook
Download/Purchase Options :
You must be logged in to purchase or download articles.
Pyrotechnic Ignition and Propagation: A Review
K. L. and B. J. Kosanke
ABSTRACT: The ideal pyrotechnic is completely stable in storage and handling, yet performs its mission completely, with absolute reliability, upon demand. Many accidents in pyrotechnics are the result of unintentional ignitions during handling and storage. There can also be serious safety ramifications of ignition and propagation failures of pyrotechnic devices. This review article presents a fairly rigorous, but mostly non-mathematical discussion of the ignition and propagation processes.
Keywords: ignition, propagation, heat of reaction, activation energy, spontaneous ignition, thermal run-away, cook-off
Ref: Selected Pyrotechnic Publication of K.L. and B.J Kosanke, Part 4, (1995-1997), pp 122-134
(K4_122) Share on Facebook
Download/Purchase Options :
You must be logged in to purchase or download articles.
Performance Comparison between Old and New Obron German Dark Aluminum
K. L. and B. J. Kosanke
ABSTRACT: In 1997, Obron Atlantic changed their Ger-man dark aluminum. (Their former product number was 5413; the new product was designated 5413 H Super.) We had published the results of a series of sound output tests of various salute powders, which included the effect of using various aluminums, including Obron’s old German dark. Because of our past work, and in response to a query on the Internet, we decided to conduct a brief investigation comparing the sound output of these two aluminum powders when used in a common flash powder formulation. This article presents those results.
Ref: Selected Pyrotechnic Publication of K.L. and B.J Kosanke, Part 4, (1995-1997), pp 119-121
(K4_119)
Download/Purchase Options :
You must be logged in to purchase or download articles.
Sky Rocket Performance Characteristics
K. L. and B. J. Kosanke
ABSTRACT: Over the years, we have occasionally had the opportunity to conduct brief studies of fireworks rockets, both sky rockets and smaller bottle rockets. Most recently, an investigation was performed using some Horse Brand sky rockets (Glitterous Lights, Clustering Bees, and Flying Butterflies). This short article is written in the belief that a summary of those results may be of general interest.
Ref: Selected Pyrotechnic Publication of K.L. and B.J Kosanke, Part 4, (1995-1997), pp 116-118
(K4_116) Share on Facebook
Download/Purchase Options :
You must be logged in to purchase or download articles.
A Survey of Concussion Powders
K. L. and B. J. Kosanke
ABSTRACT: A collection of six commercial concussion powders were test fired in concussion mortars to determine internal mortar pressure, air blast pressure, and the duration of air blast positive phase. The internal mortar pressures for various powder types and load masses ranged from less than 200 to nearly 100,000 psi (700 MPa). For the same powder loads, the air blast pressures at a distance of approximately 70 in. (1.8 m), ranged from 0.07 to 1.7 psi (12 kPa). This corresponds to sound pressure levels (peak–ultra fast–linear) ranging from 148 to 175 dB, and relative loudness values ranging from 1.0 to 6.8. For the same powder loads, the durations of positive phase ranged from nearly 4 ms down to 0.7 ms.
Keywords: concussion powder, blast wave, mortar pressure, sound pressure level, loudness
Ref: Selected Pyrotechnic Publication of K.L. and B.J Kosanke, Part 4, (1995-1997), pp 102-115
(K4_102)
Download/Purchase Options :
You must be logged in to purchase or download articles.
ATF’s Classification of Flash Powders
K. L. Kosanke
ABSTRACT: This brief article is based on my comments to the US Bureau of Alcohol, Tobacco and Firearms (ATF) concerning their classification of all flash powders as high explosives. In this query, I chose not raise the issues of flash powder storage requirements, quantity limits in process buildings, or any of the issues regarding bulk salutes. I omitted those subjects because I was not prepared to make specific recommendations on those subjects at this time. This article was written for publication because of the possibility someone would find this information useful or interesting.
Ref: Selected Pyrotechnic Publication of K.L. and B.J Kosanke, Part 4, (1995-1997), pp 100-101
(K4_100) Share on Facebook
Download/Purchase Options :
You must be logged in to purchase or download articles.
